Honda CBR XX Forum banner

1 - 16 of 16 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Good morning folks,, I was riding my blackbird for a 75 mile ride. It seems to me, if I was a little more upright my back would not get so tired I have 2 inch risers currently. Is there anything out there that can push me back a bit?
 

·
Super Moderator
Joined
·
8,479 Posts
Hah
Take a look at the Gilles Vario bars of you want sticker shock. But in fairness they are modular extremely well built and completely adjustable. They have riser heights of 35, 50, 60, 70, 80 and 100mm risers. Here's a link.
 

·
Older wiser and sorer
Joined
·
1,572 Posts
The apex bars work for me. Had to do some surgery on screen and get extended brake line but worth it.
 

·
Super Moderator
Joined
·
8,479 Posts
100mm risers
130135
130136
 

·
Registered
Joined
·
6,978 Posts
Mine are 12 inches high, The handling is awesome, I sit bolt up right,
I made mine myself,
Ive also done 147,000 kays on them, I ride 10 hours a day on my Bird,
I have no pains or aches any where,
46636090_10218075588426131_9215217057895809024_o.jpg
46489485_10218075518344379_4640493455003353088_o.jpg

Glenn Brown has a set on his 05 Bird too, He loves them as well,
He had all sorts of back problems, and can now ride his Bird again, Pain free,
 
  • Like
Reactions: niko and Piddler

·
Registered
Joined
·
16 Posts
Discussion Starter #11
Hey guys I picked up the Jaws MX handle bar conversion. My brake line and clutch line are already at there maximum length. Do they sell anything to extend what I already have just adding 3 or 4 inches inches to my stock lines? Thanks in advance.
 

·
Registered
Joined
·
6,978 Posts
Vernhill sell extension throttle kits, Cut to length and solder one end on,
Sold at any bike shop, about $40-00 for the full set, Each, you need two sets,
More stuff in the packet than you will ever need,
 

·
Registered
Joined
·
6,978 Posts
It's the two hydraulic lines. Is that the same thing?
Sorry, Misunderstood you,

Take your Hydraulic lines to the local hydraulic hose repair place and get them to make up new lines for you,
They will do it while you wait,
Any size you want,
Get brand new lines, Not extend the ones you have, Then if you want to return it to standard, You still can,
 

·
Super Moderator
Joined
·
8,479 Posts
Second Deadman's suggestion. Did that exact thing with the Gilles bars when I put the 100mm risers on my Busa conversion. Think it cost me 60.00 for both the brake with a crossover and clutch lines
 
  • Like
Reactions: deadman
1 - 16 of 16 Posts
Top