Honda CBR XX Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hi Folks,

Brand new to the forum.. 2006 Two Tone Blackbird rider from Cork, Ireland.

Bought a Switchback Kit from ebay and unsure how to wire up the DRLs.

Three wires coming from each indicator.. +ve and -ve for the indicator and a +ve for the DRLs. Do people wire both DRL wires straight to the sidelight bulb wire or ignition?

Any diagrams or tips? Thanks!

IMG_20190724_165731_872.jpg
 

·
Registered
Joined
·
79 Posts
I took a live feed from the sidelight bulb and fed to both indicators for the 'third' wire. This means my drl's only come on when my lights are switched to at least the sidelight position, but then I run with my dipped beam on all the time anyway.
 

·
Registered
Joined
·
165 Posts
I took a live feed from the sidelight bulb and fed to both indicators for the 'third' wire. This means my drl's only come on when my lights are switched to at least the sidelight position, but then I run with my dipped beam on all the time anyway.
I did the same but put a panel switch on the wire as we're only allowed to use DRL and low beam simultaneously in daylight in Sweden.
 
1 - 3 of 3 Posts
Top