Honda CBR XX Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
268 Posts
Discussion Starter #1 (Edited)
ONCE AGAIN, THE FOLLOWING WILL BE ADDED TO THIS MAGNIFICENT MACHINE!
Anything else added will be in GREEN.

Complete Black gloss fairing kit
Partially wrapped frame, Black gloss(using Vvivid vinyl)Saves from having to paint...
Wrapped turn signals, Black gloss(using Vvivid vinyl)Saves from having to paint...
Dash and dash panels, painted Black gloss by RENNSPA Auto Body
Gas tank, painted Black gloss by RENNSPA Auto Body
Powder-coated: Rims, Foot pegs, Swingarm, Front Forks, Alt and Clutch covers
Fan bypass switch
Upgraded reg rectifier
Upgraded stator

Fix pesky loom prob! 99-00 models
Digital gear indicator
Front and rear camera

Dark smoke turn signals lens
LED switchback turn signals
Pro Stop(adjustable rear fast/slow flashing stoplight)
Air horn 30DB
Alarm system(Optional remote start)
Custom reservoir covers
Chain oiler
Screens/grills on all vents
New additional custom vent screens/grills
Custom Rad. & oil cooler screens/grills
Hugger

Booster Plug(Easier than Power Commander! Results instantaneous! As per other Blackbird pilots.)
Cell phone bracket holder
Custom decals
Re-modeled rider pegs
Modified Corbin Beetle Bags -
90% complete
Modified Givi 3 case set - 90% complete
Black double bubble screen
Red Black sport grips
Red Black sport levers
Red Black bar ends
Mirror extenders covered with Black gloss(using Vvivid vinyl) no paint...

6mm spacer for rear shock
Custom bike stand stop for 4 into 1 system
New front wave discs

New rear wave disc
New Front & Rear brake pads
Painted red and Black bolts
Professional paint job(Clear Coat for fairing kit to protect decals.)

NEW STUFF...

Delkevic exhaust 4-1 14" carbon oval
New smaller fan to be place beside original fan on rad. Will move orig. fan few inches.
New Crash wing Fabricated from a block of polyethylene/polystyrene
New insulation for lowers and gas tank
Triumph Sprint 1050 Bar risers(Taller than VFR and Heli!)
"Fenda extenda!"
Belly tank guard
New tires
New chain and sprockets
All new fluids
"One key fits all" for Givi set
New rad( Might also get new oil cooler...)
"New" left controls, from Yamaha FJ yellow lever for rapid flashing AND hazards

New spherical mirrors with blue turn signal lights installed
New volt meter with USB all in one mounted on the yoke with a special bracket
New Black and white windscreen bolts

"New" Wing rack with New fitting kit
New Mototech undertail? The company is here in Montreal BUT the owner is laid up in the hospital(Not Covid related...) and looking to sell the business! AARRRGGGGHHHH!!!(Hope he recovers!)

PARTIAL PIC OF NEW STUFF...
130699


Triumph Sprint 1050 bars tall!(They also made "short" bars...)
130762


130763


Fitting kit is new but will have to paint or powder coat "New" wingrack...
130707


Fitting kit is new but will have to paint or powder coat "New" wingrack...
130708


...
130709


...
130710


...

130711
 

·
Play, it makes life fun
Joined
·
1,992 Posts
Excuse me but parts list is a misnomer! Try... full parts catalog

Sent from my SM-N960U using Tapatalk
 

·
Registered
Joined
·
268 Posts
Discussion Starter #3 (Edited)
Excuse me but parts list is a misnomer! Try... full parts catalog

Sent from my SM-N960U using Tapatalk
Lololol Yep! Tons of work to do! And with this lockdown, may not be able to powder coat certain parts until April or May! Phrak! 🤔 😣 More potential delays... However, I'm dedicated to the cause!
 

·
Registered
Joined
·
591 Posts
Where'd you get your pre-formed vent grill meshes from? I've stalled making mine as the stainless steel mesh I bought turned out to ve anything but stainless and rusted immediately!

Remember too not to use mesh on the front nose air vents if this projevt bike is an FI (you list Booster plug instead of a Power Commander). The carbies can take it but they FIs are ram air and the mesh is reported as messing up the airflow too much causing problems.
 

·
Registered
Joined
·
268 Posts
Discussion Starter #6
Where'd you get your pre-formed vent grill meshes from? I've stalled making mine as the stainless steel mesh I bought turned out to ve anything but stainless and rusted immediately!

Remember too not to use mesh on the front nose air vents if this projevt bike is an FI (you list Booster plug instead of a Power Commander). The carbies can take it but they FIs are ram air and the mesh is reported as messing up the airflow too much causing problems.
Got them from Fleebay! BUT U can also score them from JAWS IF they have any more left! You can always use "stainless steel" BUT coat them with a clear coat to protect them like I did for my last makeover...
Oh! Really? Never had any problems with air flow... None that I can perceive, that being said will be watching closely now that U mentioned it. Thanks man! Also, hope yur doing well!
 

·
Registered
🏍Bird 1 - Carb 1998 🏍Bird 2 - Carb 1998
Joined
·
37 Posts
Hi,
You plan to have "switchback LED" signal lights?
I tried to add LED 12V5W bulds and even some smart LED but didn´t work.
It starts blinking as if one lamp was faulty. Do we need to get messy with a soldiering iron and some electrical parts?
 
1 - 7 of 7 Posts
Top