Hello all, new to this site as I acquired a 98 Blackbird last year. Short story, bought a 98 bird not running and it sounded like bad starter or battery. Well it turns out the crankshaft was seizing and number 2 rod bearing had about 10mm clearance. I've rebuilt the entire motor, got everything from honda except for the crank since its no longer available. I've done every bearing in the trans, new counter shaft etc etc..Decent amount of $ in it. Here's my problem, the oil cooler is full of metal. The factory cooler lines are rusted out as well. I have no problem buying the lines from JAWS but i cannot find a new oil cooler or one I can make work with the honda lines. Has anyone replaced their cooler? specifically the carbed models since the FI one is still available..will the FI one work?