Honda CBR XX Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
433 Posts
Discussion Starter #1
Hi Guýs
The idle speed on cold start is over 2000 rpm
I want to bring that to about 1600
If im not mistaken the wax unit has a knob on it to set the base cold start butterfly opening ? This can be used to slow the idle?
Thanks
Paul
 

·
Registered
Joined
·
2,289 Posts
Greeting Paul,
The nob your referring to is the idle adjustment.
To adjust the wax unit there is a tiny nut on the end of the wax unit. Turn that out some to slow warm up rpm. This closes the starter valves.
Had to do that myself. Good luck on turning that little nut.
STex, out
 

·
Registered
Joined
·
433 Posts
Discussion Starter #3
Super thanks STx ill look at soing that
Just replaced chain and sprockets for a touring set up less teeth at the back
Paul
 

·
Play, it makes life fun
Joined
·
1,896 Posts
Super thanks STx ill look at soing that
Just replaced chain and sprockets for a touring set up less teeth at the back
Paul
I went to the 44 tooth European Sprocket count. Dropped it around 300 rpm. Works great.

Sent from my SM-N960U using Tapatalk
 
1 - 5 of 5 Posts
Top