Honda CBR XX Forum banner
1 - 3 of 3 Posts

·
Administrator
Joined
·
9,704 Posts
Check the factory service manual in the resources section. It'll have the connections called out. But be advised you may only be able to activate blacklisting. As for gage activation your going to need the ECM connections coming out of the main harness
 

·
Administrator
Joined
·
9,704 Posts
Your best bet would be it power it up with everything intact and then take your readings off the circuit board itself. The factory schematic is only going to show primary input signals. Unless someone has access to factory details schematics. I suspect they won't as that's getting into factory proprietary information.
 

·
Administrator
Joined
·
9,704 Posts
Then the factory manual here in the resources section should give you that much.

 
1 - 3 of 3 Posts
Top