Any difference?
Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the CBRXX.com.

Register ButtonIf this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Results 1 to 9 of 9
Like Tree6Likes
  • 1 Post By woodwizard
  • 1 Post By TheDuck
  • 1 Post By adeyren
  • 3 Post By beestoys

Thread: Any difference?

  1. #1

    Member #
    20154
    Bike(s)
    1998 cbr1100xx
    Join Date
    May 25 2015
    Location
    Somerset
    Posts
    979
    Liked
    305 times

    Any difference?

    Is there any difference between the brake line layout of carbie and injected bikes? Can't imagine there is, but thought I would ask.

  2. # ADS
    Sponsor
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

    CBRXX.com is the original Honda CBR1100XX Super Blackbird community! Registered Users do not see these ads. Please Register - It's Free!


  3. #2

    Member #
    4167
    Bike(s)
    1997 CBR1100xx
    Join Date
    Jul 21 2008
    Location
    Preston - United Kingdom
    Posts
    767
    Liked
    196 times

    Re: Any difference?

    Quote Originally Posted by woodwizard View Post
    Is there any difference between the brake line layout of carbie and injected bikes? Can't imagine there is, but thought I would ask.
    Actual lines - no

    The PCV ( Presure Control Valve ) changed on the Fi to provide less pressure to the rear brake so the bike stayed more stable under braking.

  4. #3

    Member #
    20154
    Bike(s)
    1998 cbr1100xx
    Join Date
    May 25 2015
    Location
    Somerset
    Posts
    979
    Liked
    305 times

    Re: Any difference?

    Ta

  5. Remove Advertisements
    CBRXX.com
    Advertisements
     

  6. #4

    Member #
    20154
    Bike(s)
    1998 cbr1100xx
    Join Date
    May 25 2015
    Location
    Somerset
    Posts
    979
    Liked
    305 times

    Re: Any difference?

    I have just got a full set of braided hoses for the front and back brakes and the clutch. What is going to be the most efficient way of bleeding this once fitted, other than getting Pete and Ade over for a spanner party
    TheDuck likes this.

  7. #5
    Supercharged Mod
    Member #
    4781
    Bike(s)
    99 Bird. 03 Supercharged KwakBird. DR800 Big
    Join Date
    Oct 25 2008
    Location
    UK South West
    Posts
    12,341
    Liked
    3922 times

    Re: Any difference?

    The clutch is no big deal, bit of plastic tube works well.
    The rest a combination of blow and suck with something like this should speed up the process
    syringe.jpg
    woodwizard likes this.
    Full of Hot air? Intercool yourself............ you know it makes sense

  8. #6

    Member #
    20154
    Bike(s)
    1998 cbr1100xx
    Join Date
    May 25 2015
    Location
    Somerset
    Posts
    979
    Liked
    305 times

    Re: Any difference?

    Ah right, so just a syringe to draw the brake fluid through.

  9. #7
    Supercharged Mod
    Member #
    4781
    Bike(s)
    99 Bird. 03 Supercharged KwakBird. DR800 Big
    Join Date
    Oct 25 2008
    Location
    UK South West
    Posts
    12,341
    Liked
    3922 times

    Re: Any difference?

    Quote Originally Posted by woodwizard View Post
    Ah right, so just a syringe to draw the brake fluid through.
    You can use a syringe to push fluid in as well, can be helpful to fill the secondary cylinder if the top is 'cracked' just a tad.
    Full of Hot air? Intercool yourself............ you know it makes sense

  10. #8

    Member #
    20884
    Bike(s)
    2000 Bird - 2 RSV Milles - CBR600RR
    Join Date
    Nov 06 2015
    Location
    Worcester UK
    Posts
    3,074
    Liked
    1092 times

    Re: Any difference?

    Woody. I've got this one. Get a mate to keep topping up and you can pull a load through in one pull.

    https://www.amazon.co.uk/Laser-5698-.../dp/B00FMT8F74
    woodwizard likes this.
    carpe diem

  11. #9

    Member #
    2343
    Bike(s)
    2K Titanium, 85 V65 Sabre (Totalled but saved me)
    Join Date
    Sep 24 2007
    Location
    Arizona
    Posts
    6,963
    Liked
    1788 times

    Re: Any difference?

    Then when your done doing all the drawing go back to the old tried and true pump crack bleed close repeat. And follow the factory guide for the order. Don't be afraid to tap unions with a brass rod or hammer to shake out stock bubbles. Then when your done go back to the masters of echo system and gently squeeze then snap release the levers/handles. You'll see small bubbles come up into the reservoirs. Keep this up until all the bubbles stop. Ohh when bleeding the slaves or calipers fine bubbles are most likely it leaking air past the nipple and the hose. Your looking for large bubbles in the line. Once those are gone go to the partial squeeze and release. This bleeds any air caught in the lines most the time above the caliper/Slave. Then if you have the time block the respective masters open with the covers off overnight. This let's any other trapped air to bleed to the highest point.
    Route 191 formerly Route 666 Some say that this section of the
    road has 1100 curves in 95 miles.


 

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Any difference between the front and rear EBC HH pads?
    By Jonar in forum Suspension / Tires / Wheels / Brakes
    Replies: 3
    Last Post: 04-27-2018, 9:53 AM
  2. Replies: 0
    Last Post: 12-19-2017, 4:46 PM
  3. Replies: 16
    Last Post: 12-25-2008, 9:33 PM
  4. Any one got any plans for weekend rides?
    By Sweetruss in forum Southeast USA
    Replies: 9
    Last Post: 06-08-2007, 2:04 PM
  5. Donnington WSBK Times difference.....
    By dunedain in forum Motorcycle Racing
    Replies: 1
    Last Post: 03-30-2007, 12:20 PM