hi to you all
Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the CBRXX.com.

Register ButtonIf this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Results 1 to 2 of 2

Thread: hi to you all

  1. #1

    Member #
    Join Date
    Nov 10 2019
    0 times

    hi to you all

    just been looking to see if anyones got any advice for a 2001 bird with a wiring loom issue, the problem I've got is fuel pump will not prime. kill switch ok , relays all okayed looks like 1st injector or corrosion in loom, I think its that yellow plug with 10 or more green wires that don't go anywhere. checked key/ honda hiss out all seems ok.

  2. # ADS
    Join Date

    CBRXX.com is the original Honda CBR1100XX Super Blackbird community! Registered Users do not see these ads. Please Register - It's Free!

  3. #2

    Member #
    2K Titanium, 85 V65 Sabre (Totalled but saved me)
    Join Date
    Sep 25 2007
    1896 times

    Re: hi to you all

    The plug in question is in the main harness back between the injector plug area and the starter relay. It's in that part of the loom taped in. Look for a square like bulge in the main loom harness. You'll have to carefully cut the tape away. Have you tried hot wiring the fuel pump to see if it will run. Also check the kill switch block contacts they control everything on the bike. If they are dirty it'll not cycle correctly. And also check the back of the main ignition switch barrel where the primary wires come in. Thats been know to cause issues as well. Good luck and let us know what you find so we can give further insight and help
    Route 191 formerly Route 666 Some say that this section of the
    road has 1100 curves in 95 miles.


Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts