How to connector hoses carburateur
Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the CBRXX.com.

Register ButtonIf this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Results 1 to 6 of 6
  1. #1

    Member #
    38237
    Join Date
    Aug 18 2019
    Posts
    4
    Liked
    0 times

    How to connector hoses carburateur

    Dear BB drivers,

    I have currently bought a BB from 97.
    It wont run very well so I lifted the tank up.
    I wonder if the hoses are correct connected.

    2 fuel lines from the tank to the carburateurs.
    1 small lines from the engines to the fueltank gestapt
    1 line for bleed the tank.
    1 overflow line.

    But at the carburateurs are 2 fat lines who are not connected.
    Can somebody help me with a drawing hoe to connect.

    Of I put compresse air in those 2 hoses the engine will run fine. But without it will not run.

    With regards, Griekel

  2. # ADS
    Sponsor
    Join Date
    Always
    Posts
    Many

    CBRXX.com is the original Honda CBR1100XX Super Blackbird community! Registered Users do not see these ads. Please Register - It's Free!


  3. #2

    Member #
    1728
    Bike(s)
    81,82,83 CBF's, 98 CBRxx, 07 CBR-1000RR/R, 83 FXSB
    Join Date
    Jun 03 2007
    Location
    Canada
    Posts
    3,969
    Liked
    1041 times

    Re: How to connector hoses carburateur

    "Stemmata quid faciunt."

  4. #3

    Member #
    1728
    Bike(s)
    81,82,83 CBF's, 98 CBRxx, 07 CBR-1000RR/R, 83 FXSB
    Join Date
    Jun 03 2007
    Location
    Canada
    Posts
    3,969
    Liked
    1041 times

    Re: How to connector hoses carburateur

    Also note: There is a "auto shut off" petcock on the underside of the fuel tank. Engine run vacuum is required to open the diaphragm on the petcock to allow fuel to flow from the tank to the carb float bowls.

    T.
    "Stemmata quid faciunt."

  5. Remove Advertisements
    CBRXX.com
    Advertisements
     

  6. #4

    Member #
    38237
    Join Date
    Aug 18 2019
    Posts
    4
    Liked
    0 times
    [QUOTE=TigreST;633797]Also note: There is a "auto shut off" petcock on the underside of the fuel tank. Engine run vacuum is required to open the diaphragm on the petcock to allow fuel to flow from the tank to the carb float


    Thnx! The engine get benzine. But 1 side wont flow. Wen I blow air into the airbreather hose than the engine will run as it belong. So I think that the seal from the fueltank is broken or a rubber in the carburateur is broken. Engine had a long still standing time.
    Its a vacuüm problem.

  7. #5

    Member #
    2343
    Bike(s)
    2K Titanium, 85 V65 Sabre (Totalled but saved me)
    Join Date
    Sep 24 2007
    Location
    Arizona
    Posts
    6,999
    Liked
    1800 times

    Re: How to connector hoses carburateur

    Or the carbs are crudded up. Looks like you may have a rebuild in your future judging byt the forced air clearing up the running issue. Especially since just mentioned it had been parked for a while. They don't take well to being parked for long periods.
    Route 191 formerly Route 666 Some say that this section of the
    road has 1100 curves in 95 miles.

  8. #6

    Member #
    38237
    Join Date
    Aug 18 2019
    Posts
    4
    Liked
    0 times
    Yes. I cleaned the inside from the undersite off the carburateurs. Also the flootneedle Chambers. Tommorow I will open the upper side too check the rubbers. The gastank membrane is new. I let you know if I find something strange.
    Thx for the reactions.


 

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •