Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the CBRXX.com.

Register ButtonIf this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Looking for info

This is a discussion on Looking for info within the Introductions forums, part of the Site Related Forums category; Whats up ppl. I have a 98 bb an i had hid l/h put on (all dealer mech) an my lights go off light im ...

+ Reply to Thread
Results 1 to 6 of 6
  1. #1

    Member #
    13087
    Bike(s)
    CBR XX , GSXR , 999
    Join Date
    Feb 02 2012
    Location
    Paris Tn
    Posts
    4
    Liked
    0 times

    Looking for info

    Whats up ppl. I have a 98 bb an i had hid l/h put on (all dealer mech) an my lights go off light im 5.0 till they just quit an my speedo an tach flip out im trying to learn all aboout the bb caus its been my best bike. i see the post on the r/r could this be the prob? Took it to Honda of Houston they said all is good new batt an a g later two days same prob. Im reading the r1 is a good one to use but what year does it mater do they all put out same readins?Finding parts is hard to seeing this is the first bike I really got into. Can a sssa be put on it any ino on any parts or mods would be very helpful. I spend alot of time on my bike when it runs but i do check my emails an txt elijah122280@gmail 731-333-6890 an is there say a gathering of bb for a ride of some sort would be nice to get involved in. Thx for any help any one is willing to give.

  2. # ADS
    Sponsor
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

  3. #2

    Member #
    439
    Bike(s)
    '02 metalic cherry red CBR 1100 XX
    Join Date
    Nov 25 2006
    Location
    Vancouver BC Canada
    Posts
    7,648
    Liked
    135 times

    Re: Looking for info

    Download the manual pdf. Try Jaws for BB goodies and necessities. Depending on your milage I would be searching for an replacement rear shock and front rebuild. Check your R&R, stator, and fuses. Do you know when your bike last had new fluids all round? Where'd you get the HIDs? What did they do for a thousand bucks? I use oem when replacing electricals. I'm having a bit of a problem with this sentence; "Can a sssa be put on it any ino on any parts...." What does this mean? Good Luck
    '02 Bird, Yoshi SS full system, PCIII, Corbin GunfighterLady, Givi hard bags with full lighting system, Goodridge steel lines, HIDs, Pazzo levers, Jaws front suspension + RaceTec GoldValves, fork brace, Penske adj rear, Acumen GI, Heli Bars, Hel oil lines, BattleStep rear sets, Samco red silicon rad hoses. Dyna Coils. Galfer wave rotors.

  4. #3
    here's jonny
    Member #
    8089
    Bike(s)
    Blackbird 1999. Blue.
    Join Date
    Mar 22 2010
    Location
    Ribble Valley, Lancs, Great Britain
    Posts
    1,337
    Liked
    23 times

    Re: Looking for info

    welcome from north england, guttted, weather reports say snow.
    cant grumble too much been riding all winter so far.
    enjoy the bike when you have it sorted
    dont ***k with the baldies

  5. #4

    Member #
    13087
    Bike(s)
    CBR XX , GSXR , 999
    Join Date
    Feb 02 2012
    Location
    Paris Tn
    Posts
    4
    Liked
    0 times

    Re: Looking for info

    I have the bird serviced about 1 a mnth i get all parts from Honda of Houston as that i dont know much about bikes yet. H.I.D came from an installed by honda fluids have been changed new shock/forks/tires/plugs/wires/batt/#530 chain/ every thing has been replaced but internals an sensors with wire harness i have just hit the 30k when i had a wire come loose on my kill switch I had Raymors in Paris Tn replace with a new one i got from Honda then all these problems started. I took back to Tx paid Honda of Houston a g to test the bike only to have them tell me that the batt was bad which i told them that idk? They replaced with a sealed batt this time an it to poped 3 days later. An sry on the sentence (single side swing arm be put on the bike an any info for mods or learning or parts aftermarket). all parts replaced or put on bike have been oem minus the H.I.D.

  6. #5

    Member #
    13087
    Bike(s)
    CBR XX , GSXR , 999
    Join Date
    Feb 02 2012
    Location
    Paris Tn
    Posts
    4
    Liked
    0 times

    Re: Looking for info

    Ok so here is my deal you guys on this forum r the SH!! you know ur stuff my problem with my bike is the r/r it puts out one way but not the both or something like that. My symptoms if any one else runs into this started out my tach an spedo would go haywire then my headlights would start flashing till they just wnt off or batt finally died u pick the clashay, the spedo an tach would quit then start working fine with no headlights an all electrical lights dim blinkers/brake ect. It over charged i take it poping the lids on the batt burned the wire by the plug so I am taking the advice of the already well into it riders an going with the 01 yzf r1 r/r. Any newbies like me on this site listen to these guys they know what they r talking about Canadianbird an Smurf the two of u guys info was great like a orgasim waiting to happen my bike will be back up an running come tuesday when the parts get here thank you guys so much. Also the part brand new is way cheaper then what honda offers by almost 2 bills 75 for the r1 r/r compare tpo almost 300 for the xx r/r. I dont understand how Honda can make a part that wont cut it for twice the price but i am coming here from now on to get advice an not the shops.
    Last edited by 14U2NV; 02-03-2012 at 12:43 PM.

  7. #6

    Member #
    439
    Bike(s)
    '02 metalic cherry red CBR 1100 XX
    Join Date
    Nov 25 2006
    Location
    Vancouver BC Canada
    Posts
    7,648
    Liked
    135 times

    Re: Looking for info

    Glad to hear it's geting sorted out. There are other places to buy a R&R I just prefer oem for electrical. Perhaps the search button R&R can provide alternatives. I've only replaced one R&R in 170,000 kms but two stators. I replaced the R&R only b/c I was replacing the Stator and I though, why not to be on the safe side. I can't remember what I paid. Or what Jaws wants. Honda bikes have a rep for their dodgy electrical systems. Even the VFR forum quacks about it. I'm using a MotoBatt battery. Good Luck, hope your weather is riding weather.
    '02 Bird, Yoshi SS full system, PCIII, Corbin GunfighterLady, Givi hard bags with full lighting system, Goodridge steel lines, HIDs, Pazzo levers, Jaws front suspension + RaceTec GoldValves, fork brace, Penske adj rear, Acumen GI, Heli Bars, Hel oil lines, BattleStep rear sets, Samco red silicon rad hoses. Dyna Coils. Galfer wave rotors.


 

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

  1. HID info
    By cityboy21 in forum Body / Paint / Electrical / Lights
    Replies: 32
    Last Post: 08-30-2011, 11:56 AM
  2. Need some info!! Please.
    By trinket in forum General CBR XX Discussion
    Replies: 10
    Last Post: 05-02-2011, 6:53 PM
  3. DCT info
    By X1rider in forum General Motorcycle Discussion
    Replies: 6
    Last Post: 04-03-2010, 2:24 PM
  4. need a little info please
    By flawlesscustoms in forum Suspension / Tires / Wheels / Brakes
    Replies: 4
    Last Post: 11-05-2009, 7:10 AM
  5. Even more info
    By X1rider in forum General CBR XX Discussion
    Replies: 3
    Last Post: 01-20-2009, 7:34 AM