Looking for a strecthed swing arm

chuckfastbird

Hi maybe I can get some help looking for a strechted swing arm 10 inches or 12. Have put exhaust, power commander, kn filter and once the swing arm gets stretched I will be running a wet nos system on the bike so any help would be appr. what do you believe the 1/4 mile times will be.

Karma

I am looking for one too so let me know if and when someone tells ya where to gets one bro.......

__________________
Karma

Run when you can, walk if you have to, crawl if you must, but NEVER QUIT.

Madcow

Try this site extended swingarm

Beondwacko

I don't have the link handy but there is a guy here in florida up on ebay that is selling extensions right now for $200. They offer a 4-6" stretch.

BTW, from what I have found with the XX, you may not have to strech it at all. I drag race my 01' 3-4 times a month (10.35@135 ) and it's pretty darn stable.

duncanjoshuas

i am having one made right now for my bike! there is no place that makes extentions for the blackbird due to the rear caliper guide on the swing arm!! however i have a buddy here in mississippi that has a grave yard full of blackbirds and will cut reinforce and weld them how long you want for $400 thats the swing arm new chain and brake line extensions!! let me know if your interested ill pass his number on to you!

chuckfastbird

Thanks for the reply's guys found a shop here in town that has sent it out it will have a 6 to 12 adjustable stretch and it is costing 495 and if I wanted a support bar it is a extra 150 going to see how it does with out it first. Then I am going to run a wet shot of nitrouis and a purge system wonder how it will run then.


Chuck

Beondwacko

I hate to say it like this but,,,, why don't you first lower the bike and set up the spray, THEN see if you need to strech it. That is unless you like the look.

BoostedBird

have you changed any of the internals? how much do you plan on spraying? stock motor i would only put a dry system on it. much safer and less expensive. Hey beonwacko what was you 1/8th mile time on your bird

chuckfastbird

I had it lowered but with the undertail it rubs if you have a passenger and being hee in Savannah Ga not alot of turns to play with so going with the lowered and strecthed look and then custom air brushing to go with the paint. I have never been one to leave things org. but will have the stock swing arm if I want to change things back or go up to the mountains and take some turns so life is good.

Chuck

chuckfastbird

I haven't changed any of the internals yet just going to put a 40 shot on it nothing to big I will take your advice boostedbird and go with the dry. If I end up hurting the motor then I will change rods and pistons proberly go with a big bore kit or a turbo. I know I can get more horse power out of a busa or a 14 but everyone and there mother rides one so what fun is just bolting on parts I am sure you know what I mean there love the pic of your bird Thanks

Chuck

BoostedBird

yeah! i know! some others might make more power BUT putting it to the ground is a diff story! suspension is the key

Madcow

Stretching & lowering your bike doesn't guarantee it can't be looped; First Flight

eliXXir

Personally, I am a huge fan of Terry McIntosh's work, I would run no other arm in drag racing considering the physics behind what you are doing by lengthening the bike -- not an area where a bad weld is a good idea..

He has my front forks right now. He does awesome work.

McINTOSH Maching & Fab

__________________
<CleverSignature />

Beondwacko

My 1/8 mile time ( best ) is a 6.68@109mph.