Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the CBRXX.com.

Register ButtonIf this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 30
Like Tree3Likes

Thread: POWER COMMANDER III Map and Software

  1. #1

    Member #
    9044
    Bike(s)
    '03 CBR1100xx Blackbird, Black 09 CBR1000RR
    Join Date
    Jul 09 2010
    Location
    Boston
    Posts
    130
    Liked
    0 times

    POWER COMMANDER III Map and Software

    I bought a used Power Commander III from someone with an 03 Bird running Two brothers mufflers and a K&N filter. I have an 03 Bird with 2 Bros cans. I guess I could put in the K&N filter and the PC 3 as is, but I would prefer to put in the map myself. (I prefer the stock air filter.) Anyone have the software and a map? I've never had one of these things.

    Probably the best thing I could do would be to schedule a session on the dyno and have everything set up that way. I've done that with cars and it makes a big difference.

    Kevin

  2. CBRXX.com is the original Honda CBR1100XX Super Blackbird community! Registered Users do not see these ads. Please Register - It's Free!

  3. #2

    Member #
    7761
    Bike(s)
    07 Iron Nail Blackbird
    Join Date
    Feb 04 2010
    Location
    Essex/London, UK
    Posts
    454
    Liked
    14 times

    Re: POWER COMMANDER III Map and Software

    My PCIII arrived today and after spending the money on it and being told time and time again how each 'bird is different, I will definately be getting it setup on a dyno.

  4. #3

    Member #
    9044
    Bike(s)
    '03 CBR1100xx Blackbird, Black 09 CBR1000RR
    Join Date
    Jul 09 2010
    Location
    Boston
    Posts
    130
    Liked
    0 times

    Re: POWER COMMANDER III Map and Software

    Quote Originally Posted by ScottyUK View Post
    My PCIII arrived today and after spending the money on it and being told time and time again how each 'bird is different, I will definately be getting it setup on a dyno.
    Costs a lot.

  5. #4

    Member #
    7761
    Bike(s)
    07 Iron Nail Blackbird
    Join Date
    Feb 04 2010
    Location
    Essex/London, UK
    Posts
    454
    Liked
    14 times

    Re: POWER COMMANDER III Map and Software

    130 here for a map.

    Not cheap but it running at it's best with save a little on fuel, stop the plugs fouling up and ensure the bikes doesn't do anything silly like running lean.

    For me it's a compulsory cost associated with buying a PCIII....but I do get not everyone will do it.

  6. #5

    Member #
    9215
    Bike(s)
    2000 CBRXX
    Join Date
    Jul 27 2010
    Location
    NW Indiana
    Posts
    137
    Liked
    11 times

    Re: POWER COMMANDER III Map and Software

    Honda CBR 1100 XX (2001-2006 Euro Models) 113: Powercommander Downloads, Maps, Installation Guides, Accessories and Product Purchases

    M113-005 Two Brothers Racing slip-ons and stock or aftermarket air filter


    the maps at the top of the list look like they are Euro specific where the maps at the bottom look to be for the US models.

  7. #6

    Member #
    9044
    Bike(s)
    '03 CBR1100xx Blackbird, Black 09 CBR1000RR
    Join Date
    Jul 09 2010
    Location
    Boston
    Posts
    130
    Liked
    0 times

    Re: POWER COMMANDER III Map and Software

    Thanks, this is terrific. I want to add how grateful I am for the help I get on this forum. Kevin

  8. #7

    Member #
    15093
    Bike(s)
    2001 Honda CBR11XX, PC3, Akrapovic exhaust, K&N
    Join Date
    Nov 05 2012
    Location
    Southern California
    Posts
    28
    Liked
    6 times

    Re: POWER COMMANDER III Map and Software

    I just bought a 2002 Bird last Friday. It came with a full Akrapovic exhaust and PCIII already installed. When I hooked it up to my computer, the map came back as preloaded was D&D slipons with stock or K&N filter which is not my configuration. I tried to install the map 113-509 and got an incompatible error. I contacted Chris Kelly of Dynojet, gave him the model number (102-411 PC3usb unit) and he told me this was for 1999-2001 American CBR1100XX and 1999-2000 European CBR1100XX models. I guess the P.O. bought the wrong PCIII. Does anybody know if continued use of the model will damage my Bird. It seems to be running just fine. Just went through my second tank of fuel and got 42+ mpg.

  9. #8

    Member #
    3419
    Bike(s)
    02 cbr 1100xx, 03 gsx1300r
    Join Date
    Apr 23 2008
    Location
    Fort Hood Texas
    Posts
    242
    Liked
    11 times

    Re: POWER COMMANDER III Map and Software

    socal your pcIII may not hurt hurt bike but you should get your own for that year bird cause the actual map is more responsive. call dynojet and they can tell you.
    YOU ARE ALREADY A HERO, NOW SIT BACK AND ENJOY THE RIDE.

  10. #9

    Member #
    9657
    Bike(s)
    00 Super Blackbird;09 Kawasaki Concours;09Busa
    Join Date
    Sep 19 2010
    Location
    Naples,Florida
    Posts
    42
    Liked
    5 times

    Re: POWER COMMANDER III Map and Software

    ??/

    I've never had a plug get fouled on my Birds....

  11. #10
    Welding. How hard can it be?
    Member #
    5266
    Bike(s)
    '97 Steinway (in Fast Black!)
    Join Date
    Feb 23 2009
    Location
    Pegasus, New Zealand
    Posts
    3,567
    Liked
    747 times

    Re: POWER COMMANDER III Map and Software

    Mass.

    You'll be fine running the installed map. If you are installing a map set up properly* for a free breathing K&N into your more-restrictive OEM paper element filter, then the fuel map will be running a bit rich to compensate for the K&N (The K&N will flow more air, so you need to add more fuel to return to the correct air/fuel ratio). Rich is fine, lean is dangerous. The difference between a K&N and OEM filter in terms of mapping is very small.

    To be honest, there is feck all difference in the generic maps as provided by DJ for slip-ons (any marque) and an aftermarket filter. To be safe, I'd download DJ's specific map for the TB cans and OEM filter and stick with that. That way you know you are running a DJ approved map for your configuration.

    This will get you from 6/10 in terms of performance, after installing the TB cans with no mods to the PC. Loading up a factory DJ map will take you to 8/10. Spending some hard earned dosh on a dyno session will take you to 10/10 in terms of what the bike can achieve.

    *Make sure the vendor actually had the map, currently loaded into the PC, setup by a professional and not just hacked around with guess work in his garage.

    My 2c. I could be completely wrong, so if your scooter blows up and tears off limbs in the process, blame Shewie.

    Gaz.

    "Argon, Gaz, I said argon! Not !@#$%^&* hydrogen! ... Gaz?"


  12. #11
    Resident Eh?hole.
    Member #
    4791
    Bike(s)
    Silver '02 XX
    Join Date
    Oct 26 2008
    Location
    Ontario, Canada
    Posts
    16,287
    Liked
    1670 times

    POWER COMMANDER III Map and Software

    Quote Originally Posted by Ghazzah View Post
    My 2c. I could be completely wrong, so if your scooter blows up and tears off limbs in the process, blame Shewie.
    I'm watching this thread with some interest. I have a PC for a '99-01 bird and am hopeful that the dyno-whiz will still be able to map it to run my '02.
    Where are we going...and what am I doing in this hand basket??

  13. #12
    Fastest snail on Earth
    Member #
    2092
    Bike(s)
    2001 Silverbird-FI
    Join Date
    Aug 04 2007
    Location
    Singapore
    Posts
    417
    Liked
    18 times

    Re: POWER COMMANDER III Map and Software

    Well i had a pc 3 waiting to be install in my 02 bird. Having the 25 blinks or knock sensor issue doubt it will be feasible to run on dyno. Stock bb anyway. Wondering if i juz install the pc3 will it be bad for my bb as i've no idea wat set-up it was on.
    Its not how fast ur bike goes.Its how fast u brake

  14. #13
    Welding. How hard can it be?
    Member #
    5266
    Bike(s)
    '97 Steinway (in Fast Black!)
    Join Date
    Feb 23 2009
    Location
    Pegasus, New Zealand
    Posts
    3,567
    Liked
    747 times

    Re: POWER COMMANDER III Map and Software

    Compatibility issues aside, Greysnail, if you do install the PC3, you can upload (PC3 to Laptop) the current map in the PC3 to your laptop before you start the bike and check the name of the map. Before you do this, download (Internet to laptop) the closest map to your bike's configuration from the power commander web site and have this map ready to be downloaded (laptop to PC3) to the PC3.

    Welcome to Power Commander Motorcycle Fuel Injection Tuning Module
    "Argon, Gaz, I said argon! Not !@#$%^&* hydrogen! ... Gaz?"


  15. #14
    Fastest snail on Earth
    Member #
    2092
    Bike(s)
    2001 Silverbird-FI
    Join Date
    Aug 04 2007
    Location
    Singapore
    Posts
    417
    Liked
    18 times

    Re: POWER COMMANDER III Map and Software

    Thnx Ghaz.
    Its not how fast ur bike goes.Its how fast u brake

  16. #15
    Fastest snail on Earth
    Member #
    2092
    Bike(s)
    2001 Silverbird-FI
    Join Date
    Aug 04 2007
    Location
    Singapore
    Posts
    417
    Liked
    18 times

    Re: POWER COMMANDER III Map and Software

    My PC 3 model number is 113-410...is this for bb??
    Its not how fast ur bike goes.Its how fast u brake


 

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

  1. Power Commander or Not?
    By rhodesda in forum Engine / Airbox / Exhaust / Fuel Delivery
    Replies: 50
    Last Post: 07-26-2014, 10:46 AM
  2. What power commander map?
    By farixrc in forum Engine / Airbox / Exhaust / Fuel Delivery
    Replies: 4
    Last Post: 03-08-2009, 8:31 PM
  3. does a power commander of a 02 fit on a 99 XX
    By chatvmax in forum Engine / Airbox / Exhaust / Fuel Delivery
    Replies: 1
    Last Post: 01-30-2008, 1:35 AM

Search tags for this page

blackbird power commander maps
,
downloading new map form computor power commander 3
,
dynojet power commander 3 honda blackbird
,
dynojet power commander software on tablet
,
k&n power commander software download
,
power comander to suit cbr xx super blackbird
,
power commander 3 download maps
,
power commander 3 downloadable maps
,

power commander 3 maps

,

power commander 3 maps download

,

power commander 3 software

,

power commander 3 software download

,
power commander iii maps download
,
power commander on a stock blackbird
,
software for power commander 3
Click on a term to search our sites for related topics.

Tags for this Thread