PC3 Map advice needed - Discuss PC3 Map advice needed on CBRXX, the ultimate on-line community for Honda motorcyclists. Read it in Engine / Airbox / Exhaust / Fuel Delivery. (Discussion of Honda CBR 1100 XX Super Blackbird Engine Modifications, Airbox Modifications, Exhaust Systems, Power Commanders, and Carburetors.)

AlphaCrow · 01-29-2007, 5:29 PM

Well, got a new PC3 for my BB, now trying to figure out the closest or best map out there for it.
'99 BB
Micron Slip-ons
K&N air filter

If anyone knows a lot of about these things, I could definitely use some help in selecting the best one.
THanks

SGTSkiXX · 01-29-2007, 5:34 PM

doesn't dyno jet have pre built maps to choose from on their site?

Power Commander - Honda Map Database here's a link to the maps

AlphaCrow · 01-29-2007, 6:23 PM

Hey Ski

Ya, they do, but none are the exact map I need. Seems air filter and stock don't matter pretty much, but don't see any micron slip-ons at all. Trying to see if anyone has that fixxr map in PC3 format, that one was made for K&N and baffleless pipes.

BTW, I'll have to post my army status on the forums soon. Got past the 1st board, now awaiting the background check and security clearance to finish up and then go to that final board in some other state. I will have an answer/date in march. Thanks for the help, again

SGTSkiXX · 01-29-2007, 6:43 PM

No problem glad to see you waited for that non existent slot to open up lol stupid recruiters when will they learn. glad I'm done with that

SGTSkiXX · 01-29-2007, 7:03 PM

99-2001 Honda CBR1100XX User Submitted Maps
user built map with akrapovic and k&n closest I could find.

davesxx01 · 01-29-2007, 7:08 PM

Don't use that one ^. Its for a european model, they have the great octane over there. We don't.

SGTSkiXX · 01-29-2007, 7:11 PM

good save I didn't notice that. Thanks Dave

Beondwacko · 02-08-2007, 8:27 AM

If anyone wants to try the custom map that I had made for my 01' with the PCIII USB they are welcome to it. My bike is running the K&N air filter and a set of Two Bro's Ti slip on's. The one thing I can say for sure about this map is that there was a lot of fuel in a lot of rpm ranges and throttle positions that was taken OUT. My bike was running rich as poop. Send me a PM with an email address and I'll shoot it back to ya'.

Adam

01-29-2007, 5:34 PM	#2
SGTSkiXX Join Date: Nov 07 2006 Location: Nashua NH Posts: 241	doesn't dyno jet have pre built maps to choose from on their site? Power Commander - Honda Map Database here's a link to the maps __________________ SGT Ski "People sleep peaceably in their beds at night because rough men stand ready to do violence on thier behalf" George Orwell

01-29-2007, 6:23 PM	#3
AlphaCrow Join Date: Jan 08 2007 Location: Houston, TX Posts: 18	Re: PC3 Map advice needed Hey Ski Ya, they do, but none are the exact map I need. Seems air filter and stock don't matter pretty much, but don't see any micron slip-ons at all. Trying to see if anyone has that fixxr map in PC3 format, that one was made for K&N and baffleless pipes. BTW, I'll have to post my army status on the forums soon. Got past the 1st board, now awaiting the background check and security clearance to finish up and then go to that final board in some other state. I will have an answer/date in march. Thanks for the help, again

01-29-2007, 6:43 PM	#4
SGTSkiXX Join Date: Nov 07 2006 Location: Nashua NH Posts: 241	Re: PC3 Map advice needed No problem glad to see you waited for that non existent slot to open up lol stupid recruiters when will they learn. glad I'm done with that __________________ SGT Ski "People sleep peaceably in their beds at night because rough men stand ready to do violence on thier behalf" George Orwell

01-29-2007, 7:03 PM	#5
SGTSkiXX Join Date: Nov 07 2006 Location: Nashua NH Posts: 241	Re: PC3 Map advice needed 99-2001 Honda CBR1100XX User Submitted Maps user built map with akrapovic and k&n closest I could find. __________________ SGT Ski "People sleep peaceably in their beds at night because rough men stand ready to do violence on thier behalf" George Orwell

01-29-2007, 7:08 PM	#6
davesxx01 Join Date: Oct 17 2006 Location: Madison, WI Posts: 286	Re: PC3 Map advice needed Don't use that one ^. Its for a european model, they have the great octane over there. We don't. __________________ http://www.cyclefarkle.com '01 Redbird (sold) '07 ST1300 '08 Yamaha Raider "S"

01-29-2007, 7:11 PM	#7
SGTSkiXX Join Date: Nov 07 2006 Location: Nashua NH Posts: 241	Re: PC3 Map advice needed good save I didn't notice that. Thanks Dave __________________ SGT Ski "People sleep peaceably in their beds at night because rough men stand ready to do violence on thier behalf" George Orwell

02-08-2007, 8:27 AM	#8
Beondwacko Join Date: Nov 03 2006 Location: West Palm Beach, Florida Posts: 165	Re: PC3 Map advice needed If anyone wants to try the custom map that I had made for my 01' with the PCIII USB they are welcome to it. My bike is running the K&N air filter and a set of Two Bro's Ti slip on's. The one thing I can say for sure about this map is that there was a lot of fuel in a lot of rpm ranges and throttle positions that was taken OUT. My bike was running rich as poop. Send me a PM with an email address and I'll shoot it back to ya'. Adam

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Electrical help needed.....	John01XX	Body / Paint / Electrical / Lights	14	03-17-2007 4:00 AM
Power commander or not needed?	swazijmw	Engine / Airbox / Exhaust / Fuel Delivery	3	01-06-2007 5:59 PM
Fender Bolt and Caliper Bolt Advice Needed	hillbilly	Suspension / Tires / Wheels / Brakes	5	11-26-2006 8:40 AM
WANTED - PC III Map	Hobicus	Engine / Airbox / Exhaust / Fuel Delivery	2	11-05-2006 9:35 AM