2002 Honda Blackbird wiring diagram

heisti · 05-23-2009, 12:28 PM

Quote:

Originally Posted by Uglystick

AND

nothing came back

ORNI · 06-18-2009, 9:59 AM

I made this kind of modification and I encountered some difficulties :
1/ The connectors are not compatible --> so you have to plug the cables directly and you must exactly know what is the function of each wire (you'll find a sketch in the technical documentation)
2/ the fixing diameter of the water temp sensor can be different of the original one --> you must buy an adapter
3/ you can have signal interference in the read of the RPM --> you must fing the adequat filter to put on your wire
4/ an advice : for the speed signal you can take the signal of you calculator but it is not reliable. As for me I preferred put an inductive sensor on the front wheel to be able to set the tire circumference and to adjust this parameter with a GPS.

I put a pic of the wire during the mounting and a video of the first start

Uglystick · 06-19-2009, 2:12 AM

Quote:

Originally Posted by ORNI

I made this kind of modification and I encountered some difficulties :
1/ The connectors are not compatible --> so you have to plug the cables directly and you must exactly know what is the function of each wire (you'll find a sketch in the technical documentation)
2/ the fixing diameter of the water temp sensor can be different of the original one --> you must buy an adapter
3/ you can have signal interference in the read of the RPM --> you must fing the adequat filter to put on your wire
4/ an advice : for the speed signal you can take the signal of you calculator but it is not reliable. As for me I preferred put an inductive sensor on the front wheel to be able to set the tire circumference and to adjust this parameter with a GPS.

I put a pic of the wire during the mounting and a video of the first start

I approached this differantly and had different result to you.
1/ I purchased the subloom that connects the headlights and dash to the main loom and it has the same connectors on it..
2/ I havent ordered a replacement sender unit as yet but i have worked out that they are differant.
3/ not sure about this one as the rpm worked straight up without problems.
4/ speedometer seems to work without any problems,

The problems that I have encountered so far are..

1, the fuel temp reading is at its maximum and the dash shows 132 degrees. this is caused by the different sender.

2, when you turn the bike on the dash goes through its self test and this ends exactly how you would expect it to. The oil, FI lights on, the tacho at 0 and the speed at 0. when you start the bike though the FI light goes almost off but glows.. when you use the indicators or high beams the FI light glows brighter..

Uglystick · 06-19-2009, 2:16 AM

I just watched your video and that seems to be something like a fireblade dash installed inside a blackbird housing..

What is it....

ORNI · 06-19-2009, 3:51 AM

I don't know what happens with your FI light (mine is a carb one) but the different troubles we meet are in relation with the brand of dashboards I suppose...
The brand of the one seen on the video is KOSO but I'm gonna change this year for a PZRacing dashboard (see the first pics)... more expensive but looking like more high tech (full digital)
It also exists an interesting dashboard with Starlane (the last pic)

dracki · 06-19-2009, 6:42 AM

hope this helps you

jclaude · 06-20-2009, 11:07 AM

Quote:

Originally Posted by ORNI

I don't know what happens with your FI light (mine is a carb one) but the different troubles we meet are in relation with the brand of dashboards I suppose...
The brand of the one seen on the video is KOSO but I'm gonna change this year for a PZRacing dashboard (see the first pics)... more expensive but looking like more high tech (full digital)
It also exists an interesting dashboard with Starlane (the last pic)

Can i book a flight on AIR ORNI?

Uglystick · 06-20-2009, 11:04 PM

Hey Draki thanks very much,
But i had been out and bought the haynes manual (see post 13) but i am sure they will come in usefull for someone here...

dracki · 06-21-2009, 9:47 AM

if you had waited you would've gotten a copy for free

CanadianBird · 06-22-2009, 8:21 AM

OMG, that is way too cool! Orni, did you do all that yourself? Is that on your Bird? Is that a mechanical clutch rather than hydraulic? That couldn't be a cheap install. It's impressive from my perspective.

ORNI · 06-24-2009, 4:06 AM

Quote:

Originally Posted by CanadianBird

OMG, that is way too cool! Orni, did you do all that yourself? Is that on your Bird? Is that a mechanical clutch rather than hydraulic? That couldn't be a cheap install. It's impressive from my perspective.

Happy you like it!!!... Ya I did it myself on one of my birds... It's not so complicated if you have the wiring diagram (I'm useless in electricity) but it's also true you must make adaptation pieces for the mechanical installation (for the dashboard and also for the speed sensor).

mydaemonXX · 07-10-2009, 7:54 PM

Wooooooooooooooooooooooooooooowwwww!!!!! It's very cooooooool!!!!!!!

How did you achieve this cool colours changing during the init??????

Any tutorial by here????

I've an european 2002 model, but I will like to change my dashboard red colors with something as you did (and shown).

Regards

Quote:

Originally Posted by ORNI

I made this kind of modification and I encountered some difficulties :
1/ The connectors are not compatible --> so you have to plug the cables directly and you must exactly know what is the function of each wire (you'll find a sketch in the technical documentation)
2/ the fixing diameter of the water temp sensor can be different of the original one --> you must buy an adapter
3/ you can have signal interference in the read of the RPM --> you must fing the adequat filter to put on your wire
4/ an advice : for the speed signal you can take the signal of you calculator but it is not reliable. As for me I preferred put an inductive sensor on the front wheel to be able to set the tire circumference and to adjust this parameter with a GPS.

I put a pic of the wire during the mounting and a video of the first start

Uglystick · 07-10-2009, 10:08 PM

Quote:

Originally Posted by mydaemonXX

Wooooooooooooooooooooooooooooowwwww!!!!! It's very cooooooool!!!!!!!

How did you achieve this cool colours changing during the init??????

Any tutorial by here????

I've an european 2002 model, but I will like to change my dashboard red colors with something as you did (and shown).

Regards

All you have to do is cut your dash to pieces and install a KOSO unit inside it like ORNI did..

ORNI · 07-11-2009, 10:01 AM

right!!!... in fact it's simple ... just a little of method....

If you want to make it, I'll try to help you as I can

McT · 05-22-2010, 4:28 PM

Thanks Dracki. The scans have my lights out for me

06-19-2009, 2:16 AM	#24
Uglystick Administrator Join Date: Oct 08 2007 Location: Australia Age: 49 Posts: 2,323	Re: Wiring Diagram I just watched your video and that seems to be something like a fireblade dash installed inside a blackbird housing.. What is it.... __________________ Laying in bed and crying "Oh God!" does not Constitute going to church

06-20-2009, 11:04 PM	#28
Uglystick Administrator Join Date: Oct 08 2007 Location: Australia Age: 49 Posts: 2,323	Re: Wiring Diagram Hey Draki thanks very much, But i had been out and bought the haynes manual (see post 13) but i am sure they will come in usefull for someone here... __________________ Laying in bed and crying "Oh God!" does not Constitute going to church

06-21-2009, 9:47 AM	#29
dracki Back in Black,AC/DC Join Date: Mar 03 2008 Location: Brisbane,Queensland,Australia Posts: 1,964	Re: Wiring Diagram if you had waited you would've gotten a copy for free __________________ Attitude,Charisma,Mojo & Spunk. Thats what you have on a BLACK Blackbird & there the fastest.the rest of you just dream about that annoying Shewie,Lois & Poundstrecher one post at a time

06-22-2009, 8:21 AM	#30
CanadianBird Join Date: Nov 25 2006 Location: Vancouver BC Canada Posts: 5,057	Re: Wiring Diagram OMG, that is way too cool! Orni, did you do all that yourself? Is that on your Bird? Is that a mechanical clutch rather than hydraulic? That couldn't be a cheap install. It's impressive from my perspective.

07-11-2009, 10:01 AM	#34
ORNI Join Date: Jun 18 2009 Location: France Age: 36 Posts: 35	Re: Wiring Diagram right!!!... in fact it's simple ... just a little of method.... If you want to make it, I'll try to help you as I can

Wiring Diagram - Discuss Wiring Diagram on CBRXX, the ultimate on-line community for Honda motorcyclists. Read it in Body / Paint / Electrical / Lights. (Discussion of Honda CBR 1100 XX Super Blackbird Bodywork, Seats, Seat Cowls, Paint, Windscreens, Electrical System, and Lights.)

2002 Honda Blackbird wiring diagram

charisma schematic wiring

honda cbr1100xx electric diagrams

2000 to 2001 cbr1100xx instrument cluster

05-22-2010, 4:28 PM	#35
McT Join Date: Aug 16 2009 Location: UK Posts: 1	Re: Wiring Diagram Thanks Dracki. The scans have my lights out for me

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Resistor Wiring Diagram / Signal Flash Rate Fix	ConqSoft	Honda CBR XX Resource Center	26	06-07-2010 2:46 AM
25 blinks	greysnail	Body / Paint / Electrical / Lights	5	03-04-2009 7:30 PM
Honda Blackbird wiring issue	racer4565	Body / Paint / Electrical / Lights	5	06-08-2008 1:33 PM
Wiring Diagram for 1997 XX	jasondtsu	Body / Paint / Electrical / Lights	2	10-26-2007 6:56 PM
Wiring Diagram	jbartosh	Body / Paint / Electrical / Lights	1	09-08-2007 10:11 PM