Honda CBR XX Forum banner

LED 2nd/3rd Brake Light with 2nd Turn Signals and, 2nd Running light.

2K views 6 replies 3 participants last post by  swazijmw 
#1 · (Edited)
I just installed a LED Motorcycle Light Bar with Turn Signals to the bottom of my license plate, which I think is a great additional safety feature. It fits perfect, and looks good; not to bulky. I had removed the huge license plate light years ago ,and replace the two top bolts with LED bolts that light up the license plate to make it legal. I also have a Givi E55 with brake lights installed only, but do have the Givi turn signals on the Wing rack. Not only do we have to be careful of cagers going into the back of us......Yes, our two wheeled friends too!! Lets hear opinions/comments you have.
 
#2 ·
I'd like to see it on your Bird. At night.
 
#4 ·
I've considered this "farkle" but you have to splice into the hot brake wiring, n'est pas? I have the brake lite, turn signals for my Givi bags from Twisted Throttle. Not installed yet. The brake lite for the top box is installed. I also need a big service. I've been collecting all the parts and fluids since the Fall.

Agree! One can't be too visible when surrounded by dick heads in cages. Well done.:thumb:
 
#5 ·
CB, if you plan on installing the Givi turn signals, then I would suggest doing it all at the same time, to do one soldering job....You may decide against the Versa, but as you said " one can't be too visible" and this license plate LED is not ugly at all! I had already installed the Givi brake light, and just can't justify spending another $400... let alone the labour to do it...what a pain in the ass! My Givi turn signals stick out enough, and the Wing rack is staying on.
 
#6 ·
I added extra, custom lighting to my Givi top bag... I couldn't see forking over the money for the Givi brake light, so I built a custom LED brake light and put running lights and turn signals on the edges of the top bag too. I put a short write-up about them here. I like the idea of the bar that you put under the plate, but I don't think the turn signals would be far enough out to do much good. But hey, any extra lights are a plus.
 
#7 ·
I added extra, custom lighting to my Givi top bag... I like the idea of the bar that you put under the plate, but I don't think the turn signals would be far enough out to do much good. But hey, any extra lights are a plus.

I took a look at your custom LED's...Nice work! Patience and knowledge is all it takes. My way, was the easier way....Taking into consideration, I do have a brake light installed into the Givi E55 top case, as well as the Givi turn signals which are quite high and noticeable, and as you said "any extra lights are a plus".
Thanks Ben. :thumb:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top